Advertisement
GETTING TO KNOW YOUR GRINDER
TRAVERSE ACTUATOR RELEASE
The belt that drives the grinding carriage left
and right can be released to allow manual
movement of the grinding carriage. The
Traverse Engagement Lever is located at the
front of the carriage to the left of the infeed
handwheel. See FIG. 19. Rotate the release
arm up to release the belt and rotate the
release arm down to engage belt.
PROXIMITY SENSORS
This Grinder is equipped with proximity sensors
to limit the travel of the grinding head. When
activated the proximity sensors will change
the direction of the grinding head. Adjust the
position by sliding them along the rail.
See FIG. 20.
TRAVERSE BELT
TRAVERSE ENGAGEMENT LEVER
PROXIMITY SENSORS
18
FIG. 19
FIG. 20
Advertisement
