Download Print this page

Operation; Cleaning - Prince Castle DHB2PT-32 Operating Instructions

Dedicated holding bin

Advertisement

1. Press the UP or DOWN arrow button until
the heater to be changed is selected. For
Top Cavity, the LED next to the UPR SHELF
is on, and for lower cavity, the LED next to
the LWR SHELF is on. After selecting the
cavity, the left most character in the tem-
perature display shows the heater. U is the
Upper heater and L is the Lower heater.
2. To change the temperature of the selected
zone, press and hold the SET POINT button
and press the PRINCE CASTLE button for 6
seconds. The LED indicator next to PROG
will light to indicate the Program Mode is
active.
3. Use the UP and DOWN arrow buttons to
increase or decrease the setpoint tempera-
ture.
528-501revB
U 180
U 180
U 185
4. Press the ACTUAL TEMP button to end the
Program Mode and store the setpoint tem-
perature value (the LED next to PROG will
turn off). The controller will regulate to the
new setpoint temperature.
5. Repeat steps 1-4 for remaining heaters.

OPERATION

Factory preset is set to display temperatures in
Fahrenheit. To change to Celsius, turn the power
switches off. Press and hold the DOWN arrow then
turn the power switch on and after two seconds,
release the DOWN arrow button. To change back to
Fahrenheit, turn the power switch to the off position,
press and hold the UP arrow and turn the power
switch to the on position. After two seconds, re-
lease the UP arrow button.
To view the actual heater temperature, press the
ACTUAL TEMP button. The LED indicator next to
the ACTUAL TEMP button will light. Press the UP
or DOWN arrow button to select heaters.

CLEANING

Caution: This bin is not watertight. Do
not clean with Water Jet/Jet Spray. Do
not immerse the bin with water.
Caution: Before unplugging the power
cord, make sure the power switches are in
the OFF position.
1. Unplug the power cord from the outlet.
2. Allow the bin to cool down (approximately 25
minutes).
3. Wipe down surface with a damp cloth. Do not
use a green Scotch Bright pad, unapproved
cleaner, ice or water.
4. Turn power on after all surfaces are dry.
3
U 185
Printed in USA 1/06 © 2006

Advertisement

loading

This manual is also suitable for:

Dhb2pt-32jDhb2pt-32ceDhb2pt-32gb