Care And Maintenance; Protecting The Display Screen - Fujitsu Stylistic Manual

Care and Maintenance

This chapter gives you pointers on how to care
for and maintain your Stylistic Tablet PC.

PROTECTING THE DISPLAY SCREEN

The Stylistic Tablet PC is designed to provide
you with years of service. Using a screen
protector* will help ensure that the screen
remains as clear as possible. When installed,
the screen protector becomes a durable,
replaceable writing surface that protects the
display screen from abrasion.
* This accessory is sold separately
• During normal use of the Tablet PC,
small particles from the environment can
become embedded in the pen tip and
scratch the screen. To prevent
scratching the screen, it is
recommended that a screen protector is
installed before using your Tablet PC.
• Fujitsu warranty will not cover screen
scratches that arise from misuse (e.g,
using sharp and pointed objects or any
object other than the Fujitsu Stylus Pen
to write on the surface of the screen),
accident, or unsuitable operating
environment.
To install a new screen protector on your Tablet
PC:
1. If a screen protector is already installed on
the display screen, remove it before installing
the new screen protector.
The screen protector is held onto the display
screen surface by a thin strip of adhesive
around the edges. A notch in one corner of
the screen protector allows you to slide your
fingernail under the screen protector for easy
removal.
C a r e a n d M a i n t e n a n c e
2. Clean the display by wiping the screen
gently using a soft cotton cloth dampened
with isopropyl alcohol. Ensure that all
residue has been removed from the screen
before applying a new screen
protector.Remove the protective coating
from the adhesive side of the screen
protector first, as shown in Figure 3-1.
• The Stylistic Tablet PC is not waterproof.
Do not pour liquids on the system or
wash it with a heavily soaked cloth.
• Do not place items on the top of the dis-
play, or damage may occur.
Figure 3-1 Removing the Protective Sheet
3. Apply the screen protector to the display
screen surface. When doing so, orient the
screen protector with the adhesive side of
the screen protector facing the display
screen and the notched corner of the screen
protector oriented as shown in Figure 3-2.
Figure 3-2 Installing the screen protector
41