Fujitsu Stylistic Manual page 14

Top Features:
• Pen Holder: The pen is the main input
device that you use to execute programs and
enter data. A pen holder is built into the
Tablet PC to store the pen when not in use.
• Pen Tether Point: The pen tether point is
used to attach a pen tether to help prevent
loss of the pen.
• PC Card Slot: Allows you to install a Type II
PCMCIA Card in the system.
• PC Card Eject Button: The PC Card eject
button is used to remove a PC Card from the
PC Card slot.
• Air Flow Vents: Provides secondary cooling
for processor. (Do not obstruct the vents.)
6
Figure 1-4. Stylistic Tablet PC Features (Top View)
Pen Holder
Pen Tether Point
PC Card Slot
PC Card
Eject Button
Air Flow Vents
SD Card/Memory Stick Slot
IrDA/FIR Port
Smart Card Slot
• SD Card/Memory Stick Slot: The Secure
Digital (SD) card slot allows you to install a
flash memory card
architecture allows you to transfer data
between a variety of different digital devices.
• IrDA/FIR Port: Provides an infrared interface
for communication with devices compliant
with IrDA Standard Revision 1.1.
• Smart Card Slot: The dedicated Smart Card
slot allows you to install a Smart Card
which you can store data such as medical
information or electronic "cash".
These peripherals and accessories are sold
separately.
for data storage. This
on