Fujitsu Stylistic Manual page 65

5. Enter the sharing printer name in [Share
name].
6. Click the [OK] button
Confirming connection
After you have finished the network setup
operations, access the folder whose sharing
has been set for other personal computers.
Also, confirm the status of the radio waves in
case of trouble such as a network connection
failure.
In the case of access point (infrastructure)
connection, enter the necessary data for
the access point before confirming
connection. Refer to the manual of the
access point for the access point setup
procedure.
Connecting your personal computer to
another personal computer
1. Click [Start] first and then [My Computer].
The [My Computer] window will be
displayed in the left frame.
2. Click [My Network Places] in the "Other
Places" list. The window [My Network
Places] will be displayed.
3. Click [View workgroup computers] under
Network Tasks in the left frame.
4. Double-click the personal computer to
which your personal computer is to be
connected. The folder that was specified in
"Setting the file-sharing function" on page
56 will be displayed.
5. Double-click the folder to be accessed.
W i r e l e s s L A N U s e r 's G u i d e
Confirming the status of the radio wave
Intel PROSet Wireless LAN:
1. Click [Start] -> [All Programs] -> [Intel
Network Adapters] -> [Intel(R) PROSet].
The [Intel(R) PROSet] window will be
displayed.
2. Click the [General] tab and confirm radio
status in the window displayed. The current
connection status will be displayed.
• Signal Quality
The quality of the signals is displayed on
a graph.
• Network name (SSID)
The connected network name (SSID) is
displayed.
• Profile name
"<No profile>" is displayed.
• Mode
If access point (infrastructure) connection
is in use, "Infrastructure (AP)" will be
displayed. If ad hoc connection is in use,
"Ad hoc (Peer-to-peer)" will be displayed.
• Security
The setting status of WEP is displayed.
• Speed
The communications speed is displayed.
• Band (Frequency)
The current operating frequency band is
displayed. When communication is
possible, "802.11b (2.4 GHz)" is
displayed.
• Channel
The channel number currently being
used for the communications is
displayed.
57