Other Settings; Setting Of Power-Saving Function - Fujitsu Stylistic Manual

Other settings

SETTING OF POWER-SAVING
FUNCTION
You can set the power-saving function of wireless
LAN. Default setting is auto-setting. In case of
using the power-saving function, manually control
the communication performance.
Intel PROSet Wireless LAN:
1. Click [Start] -> [(All) Programs] -> [Intel
Network Adapters] -> [Intel(R) PROSet].
The Intel(R) PROSet window will be
displayed.
2. Click the [Adapter] tab.
3. Click the [Configure] button in [Power
settings]. The [Power settings] window will
be displayed.
4. Select [Manual], and adjust the bar to set
the power-saving function.
Setting of transmission power during ad
hoc connection
By controlling the transmission power during
ad hoc connection, you can broaden or narrow
the communication range. This setting is only
effective during ad hoc connection. It will be
ineffective during access point connection.
Intel PROSet Wireless LAN:
1. Click [Start] -> [(All) Programs] -> [Intel
Network Adapters] -> [Intel(R) PROSet].
The Intel(R) PROSet window will be
displayed.
2. Click the [Adapter] tab.
3. Click the [Configure] button in [Power
settings]. The [Power settings] window will
be displayed.
4. Adjust the "Transmission Power (Ad Hoc)"
bar to set the transmission power.
W i r e l e s s L A N U s e r 's G u i d e
Setting of channels during ad hoc
connection
You can set channels during ad hoc
connection. Channel 11 is set by default. When
connecting to an existing ad hoc network, no
channel setting will be effective.
This setting is only effective during ad hoc
connection; it will be ineffective during access
point connection.
When changing channels during ad hoc
connection, change the channel settings
of all connected computers with the same
Network name (SSID) at the same time.
After changing the channels, turn off all
computers and — after they are all turned
off — turn them back on.
Intel PROSet Wireless LAN:
1. Click [Start] -> [(All) Programs] -> [Intel
Network Adapters] -> [Intel(R) PROSet].
The Intel(R) PROSet window will be
displayed.
2. Click the [Adapter] tab.
3. Click the [Configure] button in [Ad hoc
settings]. The [Ad hoc settings] window will
be displayed.
4. Change channels during ad hoc connection
by selecting a new channel from the drop
down list.
5. Click [OK].
Atheros Wireless LAN:
1. Click on the My Computer icon. Select
[View system information] from the left
frame.
59