Fujitsu Stylistic Manual page 63

3. Double-click the [System] icon. The
[System Properties] window will be
displayed.
4. Click the [Computer Name] tab.
5. Confirm the settings of [Full computer
name:] and [Workgroup:].
a. The setting of [Full computer name:]
denotes the name for identifying the
computer. Any name can be assigned for
each personal computer.
To change the name, click [Change] and
then proceed in accordance with the
instruction messages displayed on the
screen.
Enter the desired name in less than 15
ASCII character code format. Identifiability
can be enhanced by entering the model
number, the user name, and other factors.
b. [Workgroup name] is the group name of
the network. Enter the desired name in
less than 15 ASCII character code
format.
For ad hoc connection: Assign the same
network name to all personal computers
existing on the network.
For access point (infrastructure)
connection: Assign the name of the work
group to be accessed.
6. Click the [OK] button. If a message is
displayed that requests you to restart the
personal computer, click [Yes] to restart the
computer.
Setting the sharing function
Set the sharing function to make file and/or
printer sharing with other network-connected
personal computers valid.
W i r e l e s s L A N U s e r 's G u i d e
This operation is not required unless the sharing
function is to be used.
The folder and printer for which the sharing
function has been set will be usable from any
personal computer present on the network.
To share a file and/or the connected
printer, you need to be logged in as an
administrator.
Setting the Microsoft network-sharing
service
1. Click the [Start] button first and then
[Control Panel].
2. If the Control Panel is in Category view,
switch to Classic view by clicking "Switch to
Classic View" under Control Panel the left
frame. (If you are already in Classic view,
"Switch to Category View" will be
displayed.)
3. Double-click [Network Connections]. A list
of currently installed networks will be
displayed.
4. Right-click [Wireless Network Connection]
in the list, and then click [Properties] in the
menu displayed. The [Wireless Network
Connection Properties] window will be
displayed.
5. If [File and Printer Sharing for Microsoft
Networks] is displayed, proceed to step 6. If
[File and Printer Sharing for Microsoft
Networks] is not displayed, skip to step 7.
6. Make sure that the [File and Printer
Sharing for Microsoft Networks] check box
is checked, and then click the [OK] button.
Skip to "Setting file-sharing function".
7. Click [Install]. The [Select Network
Component Type] window will be displayed.
55