General Safety Instructions - Samson 6000 Series Mounting And Operating Instructions

General safety instructions

1 General safety instructions
− The device must be mounted, started up, or serviced by fully trained and qualified per-
sonnel only; the accepted industry codes and practices are to be observed. Make sure
employees or third persons are not exposed to any danger.
− All safety instructions and warnings given in these mounting and operating instructions,
particularly those concerning installation, start-up, and maintenance, must be strictly ob-
served.
− According to these mounting and operating instructions, trained personnel refers to indi-
viduals who are able to judge the work they are assigned to and recognize possible dan-
gers due to their specialized training, their knowledge and experience as well as their
knowledge of the applicable standards.
− Devices with a CE marking fulfill the requirements of the Directive 2004/30/EU. Devices
with a CE marking have an EC declaration of conformity, which includes information
about the applied conformity assessment procedure. This declaration of conformity can
be provided on request.
− To ensure appropriate use, only use the device in applications where the operating pres-
sure and temperatures do not exceed the specifications used for sizing the device at the
ordering stage.
− The manufacturer does not assume any responsibility for damage caused by external
forces or any other external factors.
− Proper transport, storage, installation, operation, and maintenance are assumed.
4 EB 6126 EN