Connections; Electrical Connection - Samson 6000 Series Mounting And Operating Instructions

4 Connections

4.1 Electrical connection

DANGER
!
Risk of electric shock and/or the formation
of an explosive atmosphere.
For electrical installation, observe the rele-
vant electrotechnical regulations and the ac-
cident prevention regulations that apply in
the country of use.
1 Fastening screw
2 Plug connector case
3 Plug insert
4 Recess
5 Rubber seal
6 Cable gland
Fig. 3: Terminal assignment at the plug connector
EB 6126 EN
5
4
1 (+)
Only for 0/2 to 10 V
0/4 to 20 mA
0/2 to 10 V
In Germany, these are the VDE regulations
and the accident prevention regulations of
the employers' liability insurance.
A male angle connector conforming to
DIN EN 175301-803 A is used for electrical
connection.
1. Unscrew the fastening screw (1) of the
plug connector and pull the plug insert
(3) out of the plug base at the case.
2. Pull the fastening screw out of the plug
connector and remove the rubber seal
(5).
3
2 (–)
3 (+)
24 V DC
Connections
2 1
6
9