General Safety Instructions - Samson 6111 Mounting And Operating Instructions

General safety instructions

1 General safety instructions
− The device must be mounted, started up or serviced by fully trained and
qualified personnel only; the accepted industry codes and practices are to
be observed. Make sure employees or third persons are not exposed to any
danger.
− All safety instructions and warnings given in these mounting and operating
instructions, particularly those concerning installation, start-up and mainte-
nance, must be strictly observed.
− According to these mounting and operating instructions, trained personnel
refers to individuals who are able to judge the work they are assigned to
and recognize possible dangers due to their specialized training, their
knowledge and experience as well as their knowledge of the applicable
standards.
− The devices comply with the requirements of the Directive 2014/30/EU. De-
vices with a CE marking have a declaration of conformity, which includes
information about the applied conformity assessment procedure. This decla-
ration of conformity can be provided on request.
− To ensure appropriate use, only use the device in applications where the op-
erating pressure and temperatures do not exceed the specifications used for
sizing the device at the ordering stage.
− The manufacturer does not assume any responsibility for damage caused by
external forces or any other external factors.
− Any hazards that could be caused in the valve by the process medium, op-
erating pressure or by moving parts are to be prevented by taking appropri-
ate precautions.
− Proper transport, storage, installation, operation and maintenance are as-
sumed.
4 EB 6111 EN