Graco Reactor E-10hp Instructions Manual page 46

Repair
Replace Temperature Control Modules
Before handling the assembly put on a static
conductive wrist strap to protect against discharge
which can damage the assembly. Follow the
instructions provided with your wrist strap.
1. See Before Beginning Repair, page 39.
2. Remove the heater shroud (89) and the electronics
cover (55).
46
NOTICE
55
3. Put on a static conductive wrist strap.
4. Disconnect all cables and connectors from the
temperature control module (59).
F . 13
IG
89
5. Remove the hex nut (56) and replace the defective
module.
6. Install the new module in reverse order. Connect all
cables and connectors.
59
56
ti21844a
332144H