Bios Setup; Submenu - Emerson RXi User Manual

User Manual
GFK-3066 Rev. A
Section 3: BIOS Setup
3.1

BIOS Setup

The BIOS is a program that handles of the basic levels of communication between the CPU and peripherals.
It contains codes for various advanced features found in this system board. The BIOS allows you to configure
the system and save the configuration in a battery-backed CMOS so that the data is retained even when the
power is off. In general, the information stored in the CMOS RAM of the EEPROM will stay unchanged unless
a configuration change has been made such as a hard drive replaced or a device added.
It is possible for the CMOS battery to fail over time, causing CMOS data loss. If this happens, you need to
install a new CMOS battery and reconfigure the BIOS settings.
Keys
Right and Left arrows
Up and Down arrows
<Enter>
+ (plus key)
- (minus key)
<F1>
<F2>
<F3>
<F4>
<Esc>
3.1.1

Submenu

When "" appears on the left of a particular field, it indicates that a submenu which contains additional
options are available for that field. To display the submenu, move the highlight to that field and press
<Enter>.
BIOS Setup
Function
Moves the highlight left or right to select a menu.
Moves the highlight up or down between submenu or fields.
Press <Enter> to enter the highlighted submenu or item.
Scrolls forward through the values or options of the highlighted field.
Scrolls backward through the values or options of the highlighted field.
Displays general help
Pervious values
Load Optimized Defaults
Saves and resets the setup program.
Exit to the BIOS Setup Utility.
Section 1
May 2019
31