User Manual
GFK-3066 Rev. A
3.2.18.1
Network Stack
Enable or disable UEFI network stack. When Network Stack is set to enabled, the screen will be displayed as
below.
3.2.18.2
Ipv4 PXE Support
When enabled, Ipv4 PXE boot supports. When disabled, Ipv4 PXE boot option will not be available.
3.2.18.3
Ipv6 PXE Support
When enabled, Ipv6 PXE boot supports. When disabled, Ipv6 PXE boot option will not be available.
3.2.18.4
PXE boot wait time
Enter the wait time value to abort the PXE boot.
3.2.18.5
Media detect time
Enter the wait time in seconds to detect media.
BIOS Setup
Section 1
May 2019
43