Connecting The Main Unit And Waterproof Power Cable - Mio MiVue M760D User Manual

Connecting the main unit and waterproof power cable

1. Check and confirm the vehicle's voltage (12 V) by using the electrical tester as
battery voltages varies by vehicle.
2. Choose one of the following connections:
• Use the electrical tester to locate the fuse from which the power is not
supplied when the vehicle is turned off. Connect the red wire (ACC) to the
fuse.
Use the electrical tester to locate the fuse from which the power is supplied
even when the vehicle is turned off. Connect the yellow wire (B+) to the fuse.
This connection allows the system to save the time settings for a long time.
• Combine the red wire (ACC) and the yellow wire (B+) before connecting them
to the fuse from which the power is not supplied when the vehicle is turned
off.
3. Connect the black wire (GND) to the metal part of the vehicle for grounding.
Make sure that the metal part is connected to the negative battery terminal of the
vehicle.
Failing to do so will cause the power cable to malfunction. Have a screw ready to
secure the wire.
❶
❷
❸
10