3. Tighten the screw to secure the camera (
Caution: When tightening the screw, do not use excessive force (no more than 2 kgf of torque) to avoid damage to
the product.
Cable connections
Caution: Make sure that water will NOT flow down to your Mio's main unit along the cables.
You are advised to tape the cables together, cover and secure them inside the
motorbike to avoid damage or abnormal sound.
Connecting the main unit, control box and cameras
Connect the GPS multi-function control box to the control box connector on the main
unit.
Use the provided camera cables to connect the front and rear cameras to the main
unit. Do not connect the cameras to the main unit without using the camera cables.
Make sure that the connectors are properly secured.
8
).
❹