Table of Contents
Advertisement
Basic Procedure for Creating a Style
1
Select the desired Style to be used as the basis for the new Style.
2
Call up the Style Creator display via [MENU] [Style Creator].
3
On the "Basic" display, select the desired Section.
NOTE
You can also select the Section by pressing one of the corresponding STYLE CONTROL buttons on the panel.
As necessary, make the following settings.
• If you want to create a Style entirely from scratch, touch [Initialize Style] to make the current Style empty.
• If you initialize the Style, set the "Pattern Length" (measure amount of the Source Pattern). After inputting the
value, touch [Execute] to actually enter the changes.
NOTE
(PSR-SX900) If an Audio Style is selected as starting data, changing the pattern length deletes the corresponding Audio part.
• Set the overall parameters such as "Tempo" and "Time Signature." The settings here commonly applies to all
Sections. After setting the Time Signature, touch [Execute] to actually enter the changes.
4
Create the Source Pattern for each channel.
• Realtime Recording
Lets you record the Style by simply playing the keyboard.
• Step Recording
(page
Lets you enter each note individually.
• Style Assembly
(page
Lets you copy various patterns from other preset Styles or Styles you have already created.
5
Edit the already recorded channel data.
• Channel Edit
(page
Lets you edit the MIDI data of the already recorded channels.
• SFF Edit
(page
26)
Lets you edit the SFF (Style File Format) related parameters of already recorded channels other than Rhythm
channels.
• Drum Setup
(page
Lets you edit the rhythm part of the Style, such as changing the sounds of the individual instruments.
6
Repeat steps 3–5 as desired.
7
Touch
(Save) to save the created Style.
(page
20)
23)
24)
24)
30)
NOTICE
The created Style will be lost if
you change to another Style or
turn off the power to the instru-
ment without carrying out the
Save operation.
PSR-SX900/SX700 Reference Manual
1
19
Advertisement
Chapters
Table of Contents
