Yamaha PSR-SX900 Reference Manual page 101

i
Detail Setting
Effect
For editing parameters related to the Effects applied to the Synth Vocoder notes.
o
Effect On/Off
!0
Type
!1
Depth
!2
Reverb
!3
Chorus
4
Touch (Save), then save the edits as an original Synth
Vocoder type.
A total of 60 types (Synth Vocoder and Vocal Harmony types) can be saved. For
ease in future recall, you should assign a descriptive name that matches the set-
tings.
Carrier • Volume: Determines the level of the Carrier for the Synth Vocoder sound.
• Noise: Determines the noise level which is input to the Synth Vocoder. This can
be used to emphasize sibilant and plosive sounds, and make the speech-like
characteristics more pronounced.
• Octave: Determines the octave setting of the Carrier for the Synth Vocoder
sound.
HPF (High • Freq (Frequency): Determines the HPF cutoff frequency for the microphone
Pass Filter) input sound. Setting this to a low value results in a minimally processed input
sound—in other words, close to the original. Setting this to higher values
emphasizes the higher frequency consonant and sibilant sounds (making
words easier to understand).
• Level: Determines the level of the microphone sound output from the HPF.
BPF1–10 Determines each output gain of the BPF 1–10 for the Inst Input (keyboard perfor-
(Band Pass mance sound). BPF 1 corresponds to the lowest Formant while BPF 10 corre-
Filter) sponds to the highest Formant.
NOTE
Feedback (howling) may result depending on the setup settings. Be careful especially when you
increase values
Turns on or off the Effects applied to the Synth Vocoder notes.
Selects the Effect type applied to the Synth Vocoder notes. You can edit also the detailed
parameters of the selected type. For details, refer to the Data List ("Vocal Effect Type List" for
the Synth Vocoder Effect types, and "Vocal Harmony Parameter List" for the Synth Vocoder
Effect parameters) on the website.
Adjusts the Effect depth applied to the overall Synth Vocoder sound.
Adjusts the Reverb depth applied to the microphone sound. This setting is equivalent to that in
the Mixer display (page 107).
Adjusts the Chorus depth applied to the microphone sound. This setting is equivalent to that in
the Mixer display (page 107).
NOTICE
The settings here are lost if you
turn off the power without carry-
ing out the Save operation.
NOTE
If you want to save the Synth Vocoder
settings to a USB flash drive, save as a
User Effect file. To do this, on the dis-
play called up via [MENU]  [Utility]
 [Factory Reset/Backup]  page 2/2,
touch [Save] of "User Effect" to carry
out the Save operation
PSR-SX900/SX700 Reference Manual
8
(page 133).
101