Yamaha PSR-SX900 Reference Manual page 84

r
Song Position
(Measure: Beat:
Clock)
t
>/o (Play/Pause)
y  (Stop)
u
Cursor
i
Step Rec
o
Event Filter
!0
Multi Select
!1
Cut/Copy/Paste
!2
Insert
!3
Delete
!4
Cancel
84
PSR-SX900/SX700 Reference Manual
Tempo Determines the tempo value.
Time (Time Determines the time signature.
signature)
Key (Key Determines the key signature, as well as the major/minor setting, for the music
signature) score shown on the display.
XGPrm (XG Allows you to make various detailed changes to the XG parameters. Refer to
parameters) the Data List (MIDI Data Format) on the website.
Sys/Ex. (System Displays the System Exclusive data in the Song. Keep in mind that you cannot
Exclusive) create new data or change the contents of the data here; however, you can
delete, cut, copy, and paste the data.
Meta (Meta event) Displays the SMF meta events in the Song. Keep in mind that you cannot cre-
ate new data or change the contents of the data here; however, you can delete,
cut, copy, and paste the data.
 When the Editing Target is set to "Lyrics":
Name Allows you to enter the Song name.
Lyrics Allows you to enter lyrics.
Code • CR: Enters a line break in the lyrics text.
• LF: Clears the currently displayed lyrics and displays the next set of lyrics.
 When the Editing Target is set to "Chord":
Style Style name
Tempo Tempo setting
Chord Chord root, Chord type, On Bass Chord
Sect (Section) Style Section (Intro, Main, Fill In, Break, Ending)
OnOff On/off status for each part (channel) of the Style
CH.Vol (Channel Volume for each part (channel) of the Style
Volume)
S.Vol (Style Overall volume of the Style
volume)
Indicates the current Song position. The events you input are recorded at the position indicated here.
You can change the current position (Measure: Beat: Clock*) by using the Data dial.
* Clock: Smallest unit for the Song position and note length. A quarter note consists of 1920 clocks.
Plays back or pauses the current Song.
Stops the current Song to return to the top of the Song.
For moving the cursor position.
Turning this on shows the Step Recording display, and turning it off shows the Step Edit display.
Calls up the Event Filter window, letting you select only the events you wish to be shown in the event
list.
: Checkmark all items.
: Remove checkmarks from all items.
: Invert checked/unchecked for all items.
After turning this on, use the Cursor buttons (u) on the display to select multiple events.
Use these when you want to copy or move the selected events.
Adds a new event.
Deletes the selected events.
Cancels editing and restores the original value.