Configuring Access Port Attribute; Configuring Hybrid Port Attribute - H3C S3600-28P-SI Operation Manual

Operation Manual – Port Basic Configuration
H3C S3600 Series Ethernet Switches-Release 1510
Table 1-5 Enable flow control on a port
Enter system view
Enter Ethernet port view
Enable flow control on the
Ethernet port

1.2.4 Configuring Access Port Attribute

Table 1-6 Configure access port attribute
Enter system view
Enter Ethernet port view
Set the link type of the
port to access
Add the current access
port to a specified VLAN

1.2.5 Configuring Hybrid Port Attribute

Table 1-7 Configure hybrid port attribute
Enter system view
Enter Ethernet port view
Set the link type of the
port to hybrid
Set the default VLAN ID
for the hybrid port
Operation
system-view
interface
interface-number
flow-control
Operation
system-view
interface
interface-number
port link-type access
port access vlan vlan-id
Operation
system-view
interface
interface-type
interface-number
port link-type hybrid
port hybrid pvid vlan
vlan-id
Chapter 1 Port Basic Configuration
Command
interface-type
Command
interface-type
Command
—
—
Required
Optional
If no default VLAN ID is set
for a hybrid port, VLAN 1
(system default VLAN) is
used as the default VLAN of
the port.
1-6
Remarks
—
—
By default, flow control is
not enabled on the port.
Remarks
—
—
Optional
By default, the link type of
a port is access.
Optional
Remarks