Displaying And Adjusting Parameters - Weishaupt W-FM 100 Installation And Operating Instruction

Call up menu level 1
Operating display
Operation
Normal operation
Manual operation
Status/Reset
Param & Display
Fault history
Lockout history
Navigating through the level
Operating display
Operation
Manual operation
Param & Display
Updating
Enter PW
TÜV Test
One level lower
Operating display
Operation
Boiler setpoint
Manual operation
User Maxload
Param & Display
Fuel
Date/Time
One level higher
Operating display
Operation
Boiler setpoint
Manual operation
User Maxload
Param & Display
Fuel
Date/Time
Change value
Auto/Manuel/Off
Time
Program stop
SwitchOffBeh
Curr: deactivated
ProgramStop
New: 36 Ignpos
Save value
Auto/Manuel/Off
Time
Program stop
SwitchOffBeh
Curr: deactivated
ProgramStop
New: 36 Ignpos
83054802 1/2018-07 La
Installation and operating instruction
Combustion manager W-FM 100 und W-FM 200

6.2 Displaying and adjusting parameters

Press [esc] key until menu level 1 is displayed.
Turn dial knob.
Cursor switches to the next menu point.
If a level has more than 4 menu points, the display scrolls up and down.
Press [ENTER].
Press [esc] key.
Press [ENTER].
Selected parameter is displayed.
Turn dial knob.
New value is displayed.
Press [ENTER].
The value changed is applied and saved.
Do not accept value:
Press [esc] without first confirming with [Enter] key.
Exit parameter without changing the value.
55-228
6 Operation