Characteristics Data - SMC Networks PF2M7 Series Operation Manual

■Characteristics data

●Flow rate/Analogue output
Voltage output (1 to 5 V)
Current output (4 to 20 mA)
Voltage output (0 to 10 V)
1: The analogue output current from the connected equipment should be 20 μA or less when selecting 0 to 10 V.
When more than 20 μA current flows, it is possible that the accuracy will not be satisfied below 0.5 V.
2: D or H changes based on the setting of the zero cut-off function.
When the zero cut-off function is set to "0", the display starts from 0 L/min. In conditions other than horizontal installation and
0.35 MPa supply pressure, the output may not be 0 L/min.
A
1 V
4 mA
E
1
0 V
2
B
PF2M710/750/711
1.04 V
4.16 mA
F
PF2M710/750/711
0.10 V
-69-
C
PF2M725
1.05 V 5 V
4.19 mA 20 mA
G
PF2M725
0.12 V 10 V
No.PF※※-OMW0007-A