Auto Mode Operation; Automatic Mode - Cornelius ABS 2.0 Service Manual

The ABS 2.0 is either in AUTO or MANUAL mode. When the ABS 2.0 is in Auto mode it can be switched to MANUAL by
pressing the MANUAL button Figure 33. And the reverse is also true, when in MANUAL the ABS 2.0 can be switched to
AUTO by pressing the AUTO button.
When the ABS 2.0 is in the AUTO mode it is just that – Automatic. There are no settings to be made in this mode and no
menus to access.

Automatic Mode:

1. The automatic mode are operated by computer. The communication via Ethernet cable between ABS 2.0 unit to
Computer. It's called POS system.
NOTE: Without communication cable the automatic mode is not working.
2. The computer must install application of ABS 2.0 to operate the Unit.
3. Press the No Ice or Extra Ice button if either ice feature is desired. Not pressing these buttons will cause the
normal ice portion to dispense. The display will indicate the selection made. These buttons are toggle switches.
Pressing once tuns ON the selection, pressing the second time turns the selection OFF.
4. After the proper selections are made, press the Enter button to dispense the drink.
NOTE: Failing to enter a Brand flavor selection will result in an empty cup being produced with or with-
out ice.
Once entered, the ABS 2.0 system will determine how many drinks are ahead in the POS queue before the manual drink will
be started. This manually entered drink will appear as a "Special" on the drink display.
© 2019, Cornelius Inc.

AUTO MODE OPERATION

Figure 56.
- 27 -
ABS 2.0 Service Manual
Publication Number: 621058590SER