Lexmark C520 Series Service Manual page 71

Error Sub
Primary message
code code
55 xx Unsupported option in
slot <x>
56 xx Parallel port <x>
disabled
Standard parallel port
disabled
56 xx Serial port <x> disabled
56 xx Standard USB port
disabled
58 xx Too many flash options
installed
58 xx Too many trays attached
61 xx Remove defective disk
62 xx Disk full
Action
• Turn the printer off.
• Unplug the power cord from the wall outlet.
• Remove the unsupported option.
• Connect the power cord to a properly grounded outlet.
• Turn the printer on.
• If this does not fix the problem, replace system card. Go to
card removal" on page
• Press until Continue appears, and then press
message.
The printer discards any data received through the parallel port.
• Make sure the Parallel Buffer menu item is not set to Disabled.
• If this does not fix the problem, replace system card. Go to
card removal" on page
• Press until Continue appears, and then press
message.
The printer discards any data received through the serial port.
• Make sure the Serial Buffer menu item is not set to Disabled.
• If this does not fix the problem, replace system card. Go to
card removal" on page
• Press until Continue appears, and then press
message.
The printer discards any data received through the USB port.
• Make sure the USB Buffer menu item is not set to Disabled.
• If this does not fix the problem, replace system card. Go to
card removal" on page
• Turn off and unplug the printer.
• Remove the excess flash memory.
• Plug in the printer, and turn it on.
• If this does not fix the problem, replace system card. Go to
card removal" on page
The C520 does not support the 500-sheet assembly.
• Turn off and unplug the printer.
• Remove the 500-sheet paper tray assembly.
• Plug in the printer, and turn it on.
• If this does not fix the problem, replace system card. Go to
card removal" on page
• Press until Continue appears, and then press
message and continue printing.
• Install a different hard disk before performing any operations that require
a hard disk.
• If this does not fix the problem, replace system card. Go to
card removal" on page
• Press until Continue appears, and then press
message and continue processing.
Any information not previously stored on the hard disk is deleted.
• Delete fonts, macros, and other data stored on the hard disk.
• Install a larger hard disk.
• If this does not fix the problem, replace system card. Go to
card removal" on page
4-47.
4-47.
4-47.
4-47.
4-47.
4-47.
4-47.
4-47.
Diagnostic information
5022-xxx
"System
to clear the
"System
to clear the
"System
to clear the
"System
"System
"System
to clear the
"System
to clear the
"System
2-13