4092-010
2. Diagnostic Information
Use the error indicator table, symptom tables, service checks, and
diagnostic aids to determine the failing part.
Start
Service error indications show as a series of blinks of the Power
light. There is a pause between each series of blinks. If your printer
has an error indication, locate the series of blinks in the
Indicator Table" on page 2-2
the printer to clear the error indicator.
The printer also logs the last error. If you think it may have an
intermittent error, or the error indicator lights have been cleared, you
can retrieve the error:
1. Run the
last error appears at the bottom of the page.
2. Run
"Clear Error Log" on page 3-4
may not be the result of a current error).
3. Run the
to
"Power-On Self Test (POST) Sequence" on page
"Print Engine NVRAM Contents" on page
"Print Test Page" on page
and take the indicated action. Unplug
to clear the error (the error
3-2. If no error appears, go
Diagnostic Information
"Error
3-2. The
2-4.
2-1