Lexmark C520 Series Service Manual page 80

5022-xxx
Error Sub
Description
code codes
241 03 Input sensor flag is not
made when it should be.
241 04 Input sensor is made
while previous page is
still in aligner.
241 05
241 20 Transparency sensor is
blocked.
2-22
Service Manual
Possible causes
• Incorrect media setting
• Incorrect paper loading
• Incorrect media restraint setting
• Paper tray failure
• Paper pick mechanism failure
• Incorrect media setting
• Incorrect paper loading
• Incorrect media restraint setting
• Paper tray failure
• Paper pick mechanism
• Incorrect media setting
• Incorrect paper loading
• Incorrect media restraint setting
• Paper tray failure
• Paper pick mechanism failure
• System card
• Transparency sensor
• Paper tray failure
• Paper pick mechanism failure
• System card
Action
• Ensure proper media is set
for the type of paper used.
• Fan media and stack flat in
tray or MPF.
• Properly set media restaints
in paper tray.
• Check the pick arm rolls
(tires) and replace if worn.
• Replace the paper tray.
• Replace the paper pick
mechanism. Go to "Paper
pick mechanism
assembly removal" on
page 4-30.
• Ensure proper media is set
for the type of paper used.
• Fan media and stack flat in
tray or MPF.
• Properly set media restaints
in paper tray.
• Check the pick arm rolls
(tires) and replace if worn.
• Replace the paper tray.
• Replace the paper pick
mechanism. Go to "Paper
pick mechanism
assembly removal" on
page 4-30.
• Ensure proper media is set
for the type of paper used.
• Fan media and stack flat in
tray or MPF.
• Properly set media restaints
in paper tray.
• Check the pick arm rolls
(tires) and replace if worn.
• Replace the paper tray.
• If the previous actions do
not fix the problem, go to
"140.01/03-08—Autocomp
(tray 1) motor error
service check" on
page 2-34.
• Replace the paper tray.
• If the previous action does
not fix the problem, go to
"910.01—Engine error
service check" on
page 2-40.