Inseego 5G Home Router 1A User Manual page 9

To install batteries:
1. Press your finger against the battery cover removal tab on the underside of the router, then
lift and open the cover.
2. Insert the three standard AA batteries into the cavity.
3. Close the battery cover, making sure it snaps shut.
IMPORTANT: Replace the batteries every six months or after a power outage. When the batteries are
at a critically low level (10% or less), the LED blinks red.
Before using the 5G Home Router 1A, read the battery safety information in the "Safety Hazards"
section of this guide. (See Proper Battery Use and Disposal on page 55).
Powering On the Router
The 5G Home Router 1A comes with a power cord and an AC wall adapter power supply.
!
WARNING Do not disable the power cord grounding plug. The grounding plug is an important
safety feature. Plug the power cord into a grounded (earthed) AC outlet that is easily accessible at all
times.
!
WARNING Use only the AC wall adapter power supply that came with the 5G Home Router 1A (or
one that has been approved by Verizon Wireless for use with the 5G Home Router 1A). Unapproved
AC wall adapter power supplies could cause the router to overheat or catch fire, resulting in serious
bodily injury, death, or property damage.
5G HOME ROUTER 1A USER GUIDE 7