Technical Support - Inseego 5G Home Router 1A User Manual

How do I reset the Wi-Fi and Router settings back to factory settings?
To reset the Wi-Fi and router settings:
1. Connect to 5G Home Router 1A. Open a web browser on the connected device and enter
http://my.router/
2. Open the 5G Home Router 1A Backup and Restore page after signing in to the Web User
Interface. (See
Factory Defaults button. This button resets all Wi-Fi and Router settings to their factory
default values. All existing settings are lost.
How do I reset the 5G Home Router 1A back to factory settings?
The master reset button is in a small hole located on the bottom of the
button returns the device to factory settings, including resetting the Wi-Fi name (SSID) and
password and admin
To reset the 5G Home Router 1A:
1. Place one end of an unfolded paper clip into the master reset button hole.
2. Press the paper clip on the button for about five to six seconds, then your
will restart.
WARNING!
The "Reset to Factory Defaults" operation overwrites ALL existing settings. If the Wi-Fi
settings change, you will lose this connection, and need to reconnect using the new settings.

Technical Support

IMPORTANT:
Before contacting support, be sure to restart both your computer and the 5G Home
Router 1A and perform the trouble shooting steps in this guide.
For additional information and technical support, visit any Verizon Wireless store, the online support
page at http://VerizonWireless,com/Support/5g/home/,
1-800-922-0204.
5G HOME ROUTER 1A USER GUIDE
or http://192.168.0.1
Backup and Restore on page 27.) The Backup and Restore page has a Restore
password.
in your browser.
or contact Customer Service at
5G Home Router 1A. This
5G Home Router 1A
47