The next time you sign in to the 5G Home Router 1A Web Interface, use the new admin password. If
you can't remember the password, click I forgot the Admin Password. After you correctly answer the
security question you set up, the current password is displayed.
Managing Wi-Fi Access
The 5G Home Router 1A offers two networks for accessing the Internet over Wi-Fi: Primary and Guest.
Each network can be accessed over two bands: 2.4 GHz and 5 GHz:
The 2.4 GHz band is supported by all devices with Wi-Fi and should be used by devices that
•
are a few years old or older. This band passes through walls better, so it may have a longer
range.
The 5 GHz band is best for newer devices. It offers better throughput and reduced
•
interference.
On the Web UI Home page, the Wi-Fi panel shows the current name (SSID) and state of primary and
guest networks. Click the eye icon to view the current passwords for each.
Figure 10. Wi-Fi Panel on the Home Page
To manage settings for these networks, select > from the Home page Wi-Fi panel (or select Wi-Fi from
the Web UI side menu). The Settings tab of the Wi-Fi page appears. Here you can turn Wi-Fi on or off,
specify the bands available to each network, and change band-specific settings.
Select Save Changes to store new settings.
5G HOME ROUTER 1A USER GUIDE
16
Need help?
Do you have a question about the 5G Home Router 1A and is the answer not in the manual?