Lan Settings - Inseego 5G Home Router 1A User Manual

LAN Settings

The LAN page provides settings and information about the 5G Home Router 1A 's local area network
(LAN).
Figure 26. LAN Tab on the Advanced Settings Page
The LAN page contains the following settings:
IP Address displays the IP address for the 5G Home Router 1A.
•
Subnet Mask displays the subnet mask network setting for the 5G Home Router 1A. The
•
default value 255.255.255.0 is standard for small (class "C") networks. If you change the LAN IP
Address, make sure to use the correct Subnet Mask for the IP address range containing the
LAN IP address.
MAC Address displays the Media Access Controller (MAC) or physical address for the 5G
•
Home Router 1A.
Turn on DHCP server turns the DHCP Server feature on or off.
•
DHCP lease time determines how often connected devices must renew the IP address
•
assigned to them by the DHCP server. Normally, this can be left at the default value, but if you
have special requirements, you can change this value.
Turn on IPv6 turns the IPv6 feature on or off. When on, connected devices can make IPv6
•
connections to the Internet.
Link-Local address displays the local address when IPv6 is turned on.
•
Click Save Changes to activate and save new settings.
5G HOME ROUTER 1A USER GUIDE 37