Changing The Ip Address - HIKVISION DS-3WF01C-2N/O User Manual

Items
DNS1
DNS2
4.2

Changing the IP address

Assume that you need to change the IP address to 192.168.1.25.
Configuration procedure
Step 1 Choose Network.
Step 2 Change the IP Address to 192.168.1.25.
Step 3 Click Save.
*
----End
If you still want to configure the wireless bridge after changing the IP address, refer to the
following procedure:
DS-3WF01C-2N/O User Guide
Description
It specifies the primary DNS server IP address of this wireless bridge. It is optional.
If you want to enable this wireless bridge to access the internet, and the egress
router supports DNS agent, you can enter the LAN IP address of the router here. If
the router does not support DNS agent, you need to enter a correct DNS IP address
here.
It specifies the secondary DNS server IP address of this wireless bridge. It is
optional.
If you have two DNS server IP addresses, you can enter the other one here.
13