Why The Throughput Is Inadequate Even With High Signal Quality; Why There Are Excessive Packet Loss And Time Delay When Pc Pings The Device Ip Address - HIKVISION iVMS-4200 User Manual

Solution
1. Remove the obstruction or bypass it.
2. Adjust the angle of the CPE and the AP.
7.5 Why the throughput is inadequate even with high signal
quality?
Reason
1. Excessive interference or multipath interference.
2. Wired device error.
Solution
1. Remove the interference or change the device frequency.
Method of changing frequency: Reboot the AP of wireless bridge to allow auto search of available signal
channel.
2. Change a network cable or use another PC.
7.6 Why there are excessive packet loss and time delay when PC
Pings the device IP address?
Reason
1. The registered jack of the network cable is not firmly connected.
2. The IP address of multiple devices conflict.
Solution
Port isolation should be conducted for APs connected to the same switch.
1. Remake the registered jack.
2. Modify the IP addresses of different devices.
Wireless Bridge (Client) User Manual
14