HIKVISION DS-3WF01C-2N/O User Manual page 30

Configuration procedure
Step 1 Choose System > Maintenance.
Step 2 Click Browser.
Step 3 Select an upgrade file and click Upload.
Step 4 Confirm the message on the pop-up window, and click OK.
----End
A progress bar is displayed on the page. Wait for it to elapse.
Then Log in to the web UI of the wireless bridge, and check the Firmware on the Status page, and
ensure that the version displayed here is the same as the firmware you upgrade.
After the firmware is upgraded, you are recommended to restore the factory settings of the
wireless bridge and configure it again, so as to ensure stability of the wireless bridge and proper
operation of new functions.
DS-3WF01C-2N/O User Guide
25