HIKVISION DS-3WF01C-2N/O User Manual page 21

Items
Hide
Country Code
Network Mode
Channel Width
Channel
Antenna Gain
Transmission Power
Allowing adjusting
transmission power
Security Mode
Security Key
Scan
DS-3WF01C-2N/O User Guide
Description
It specifies whether to hide the SSID.

Check the Hide box: The wireless bridge does not broadcast this SSID. When
connecting to the wireless network, you need to enter the SSID manually.

Uncheck the Hide box: The wireless bridge broadcasts this SSID. Wireless
devices nearby can scan find the SSID.
It specifies the country/region this wireless bridge locates. When you configure the
device for the first time, you need to select your country/region to activate the
device. It cannot be changed here.
It specifies the network mode of this device. Currently, it supports 11b/g/n, which
allows wireless devices supporting 802.11b, 802.11g, and 802.11n at 2.4 GHz band
to access the wireless network.
It specifies the bandwidth of the operating channel of a wireless network.

20MHz: The wireless bridge can only use 20 MHz channel bandwidth.

40MHz: The wireless bridge can only use 40 MHz channel bandwidth.
It specifies channel in which this device operates, and its center frequency. Auto
indicates the wireless bridge select the channel automatically according to the
current environment.
It specifies the built-in antenna gain value. It cannot be changed.
It specifies the transmit power of this device. Larger transmission power indicates
wider WiFi coverage. Set a proper transmission power can improve the security and
performance of the wireless bridge.
If you want to change the transmission power of the wireless bridge, check this
option, and enter a value in the Transmission power input box.
It specifies the security mode of the wireless network of this device.

None: It indicates that any device can connect to the wireless network of the
device. For security, this option is not recommended.

WPA-PSK: It indicates that the wireless network uses WPA-PSK security mode.

WPA2-PSK: It indicates that the wireless network uses WPA2-PSK security
mode.
It specifies the WPA pre-shared key.
It used to scan the wireless networks nearby, and displays their SSID, MAC address,
channel, signal strength, and so on for analysis.
16