HIKVISION DS-3WF01C-2N/O User Manual page 27

----End
A progress bar is displayed on the page. Wait for it to elapse.
Reset
If you cannot locate a fault of the wireless bridge or forget the login password, you can restore the
wireless bridge to factory settings and then configure it again.

When the factory settings are restored, the configuration of the wireless bridge is lost. Therefore, you need
to reconfigure it. Restore the factory settings of the wireless bridge only when necessary.

To prevent damaging the wireless bridge, ensure that the power supply of the wireless bridge is normal
during reset.
Configuration procedure
Step 1 Choose System > Maintenance.
Step 2 Click Reset.
Step 3 Confirm the message on the pop-up window, and click OK.
DS-3WF01C-2N/O User Guide
22