Esc Gs S M Xl Xh Yl Yh N [D11 D12 - Star StarPRNT SM-L Series Command Specifications

ESC GS S m xL xH yL yH n [d11 d12...d1k]
[Name] Print raster graphics data
[Code] ASCII ESC GS
Hex. 1B
Decimal 27
[Defined Area] m=1, 4, 5, n=0
0 ≤ xL ≤ 255, 0 ≤ xH ≤ 1, 0 ≤ yL ≤ 255, 0 ≤ yH ≤ 255
m=1:1 ≤ (xL + xH x 256) ≤ 128, m=4:1 ≤ (xL + xH x 256) ≤ 512, m=5:1 ≤ (xL + xH x 256) ≤ 512
1 ≤ (yL + yH x 256) ≤ 65535
0 ≤ d ≤ 255
k=(xL + xH x 256) x (yL + yH x 256)
[Initial Value] - - -
[Function] Print raster graphics data
"m" specifies the number of transfer blocks and the tone.
Disabled in Page Mode.
m Block
1 1Block (1collar)
4 1Block (1collar)
5 1Block (1collar)
Grayscale printing (2tones)
Grayscale printing (8tones)
Grayscale printing (16tones)
n: Print collar
n Print collar
0 Black
(xL + xH x 256) specifies the number of horizontal data bytes ((a number of dots x a number of bits per dot*/8, +1 if
not divisible).
(yL + yH x 256) specifies the number of dots in the vertical direction.
k indicates the number of data.
(d1 d2.....dk) specifies the image data to define.
2 tones
•
： 0 /1 (OFF/ON)
•8 tones： 0 to 7 (light to dark)
•16 tones： 0 to 15 (light to dark)
When the tone is changed, this command executes after stopping the printing operation.
When parameter is disabled:
•parameter m: Command processing end (ESC GS S m).
•parameter n: n=0
•parameter xL,xH,yL,yH:Command processing end(ESC GS S m xL xH yL yH)
[Restrictions by model]
SM-L Series: The vertical direction is less than 3200 dots (1≤ (yL + yH x 256) ≤3200).
Star PRNT Command Specifications
S m xL xH
1D 53 m xL xH
29 83 m xL xH
Tones
Monochrome printing(2tones)
Grayscale printing(8tones)
Grayscale printing(16tones)
: 1bit/1dot
: 1 bit /4dot
: 1 bit /4dot
yL yH n d11 d12
yL yH n d11 d12
yL yH n d11 d12
mPOP
mC-Print2 SM-L Series SM-S, T Series
mC-Print3
O O
X X
X X
2-42
... d1k
... d1k
... d1k
O
X
X