Star StarPRNT SM-L Series Command Specifications page 119

ESC RS C n
[Name] Select/cancel 2 color print mode
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] 0≤n≤2
48≤n≤50 ("0"≤n≤"2")
[Initial Value] n = 0, 48
[Function] Select/cancel 2 color print mode
N
0, 48
1, 49
Invalid in page mode.
Star PRNT Command Specifications
RS C n
1E 43 n
30 67 n
Select/cancel 2 color print mode
Cancel 2-color printing mode
When in 2-color print mode, the 2-color print mode is canceled by this command.
This command is ignored when the 2-color print mode is already cancelled.
The specification of this command is not cleared by ESC @.
The following processes are executed by canceling the 2-color print mode using this
command.
• Prints data in line buffer in 2-color print mode, if unprinted data exists in the line buffer.
• Waits to stop printing when printing in 2-color print mode.
• Recovers logo print setting to single color mode setting.
Select 2-color printing mode
When in single color print mode, the 2-color print mode is selected by this command.
This command selects 2-color print mode, when in single color print mode.
This command is ignored already in the 2-color print mode.
The specification of this command is not cleared by ESC @.
The following processes are executed by selecting the 2-color print mode using this
command.
• Prints data in line buffer in the single color print mode, if unprinted data exists in the line
buffer.
• Waits to stop printing when printing in single-color print mode.
• Initializes print color setting (2-color print mode setting)
• Sets logo print setting to 2 color mode setting.
2-105