Esc Gs P 6; Esc Gs P 7; Esc Gs P 8 - Star StarPRNT SM-L Series Command Specifications

ESC GS P 6

[Name] Print data in page mode
[Code] ASCII
Hexadecimal
Decimal
[Function] Lump-prints data expanded to the entire print region in page mode.
• Valid only when page mode is selected.
• After printing, the following information is maintained.
a. Expanded data
b. Selection of character print direction in page mode (ESC GS P 2)
c. Setting of print region in page mode (ESC GS P 3)
d. Character expansion position
[Model Limitations] SM-L, S and T Series : After printing, the information of "a. Expanded data" and "d. Character

ESC GS P 7

[Name] Print in page mode and recover
[Code] ASCII ESC
Hexadecimal
Decimal
[Function] Lump-prints data expanded to the entire print region and recovers to standard mode.
• All expanded data is erased after printing.
• Print region set by ESC GS P 3 (Set print region in page mode) is initialized.
• No paper cut is executed.
• After execution, the top of the line is positioned at the next print starting position.
• Valid only when page mode is selected.

ESC GS P 8

[Name] Cancel print data in page mode
[Code] ASCII
Hexadecimal
Decimal
[Function] Erases all data in presently set print region, in page mode.
• Valid only when page mode is selected.
• Portion included in the currently set print region is deleted even if data of the print region set previously.
Star PRNT Command Specifications
ESC GS P 6
1B 1D 50 36
27 29 80 54
expansion position is cleared.
GS P 7
1B 1D 50 37
27 29 80 55
ESC GS P 8
1B 1D 50 38
27 29 80 56
2-37