8.4 Command Control via the Network
Communication Port
The following two ports are assigned for the command control.
TCP #23 (Network Control Port1 (Port: 23))
TCP #9715 (Network Control Port2 (Port: 9715))
NOTE
Command Control Settings (
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter "http://192.168.1.10/
2) Enter your user name and password, and then click the [OK].
3) Click the [Port Settings] on the main menu.
4) Click the [Enable]
TCP #23. Click the [Enable]
5) Click the [Enable]
use TCP #9715. Click the [Enable]
6) Click the [Apply]
LWU701i/LW751i/LX801i/LWU601i/LW651i
Network Guide
46)
Network Control Port1 (Port: 23) to use
[Authentication] setting when
Network Control Port2 (Port: 9715) to
97
8. Other Functions
[Authentication] setting
LIT MAN USR D2 Network
020-000787-03