2.4.1 Connection in Simple Access Point Mode
Set the following when connecting the projector and the computer in Simple
Access Point mode.
Projector setting
the power of the projector and pull out the power cord's plug from the outlet. Do
projector is receiving AC power.
projector.
2) Turn on the projector.
3) Press the MENU
control panel of the projector.
The MENU you last used appears.
EASY MENU > ADVANCED MENU > NETWORK > WIRELESS SETUP
4) Set the following items in WIRELESS SETUP.
MODE: SIMPLE ACCESS POINT
IP ADDRESS
SSID
ENCRYPTION
CHANNEL
Select APPLY, then press the ENTER
About network settings
Computer setting
setting of the computer.
instruction if it is encrypted.
NOTE
computer, refer to the manual of computer or wireless LAN device.
LWU701i/LW751i/LX801i/LWU601i/LW651i
Network Guide
2. Connection to the network
WIRELESS
port of the projector.
15
.
020-000787-03
LIT MAN USR D2 Network