Command Control Via The Network; Commands - Christie DWU951 User Manual

8. Other Functions

8.4 Command Control via the Network

commands.

Communication Port
The following two ports are assigned for the command control.
(Network Control Port1 (Port: 23))
(Network Control Port2 (Port: 9715))
NOTE
Command Control Settings (
Example
http://192.168.1.10/" into the address bar of the web browser, and select
2) Enter your user name and password, and then click the [OK].
[Port Settings] on the main menu.
[Enable] check box to open Network Control Port1 (Port: 23) to use
[Enable] check box to open Network Control Port2 (Port: 9715) to
[Apply]
DWU951/DHD951/DWX951/DXG1051
User's Manual - Network Guide
43)
[Enable] check box for the [Authentication] setting when
[Enable] check box for the [Authentication] setting
192.168.1.10:
94
020-000662-02 Rev. 1 (06-2014)