Christie LWU701i User Manual-Network Manual page 103

8.4 Command Control via the Network (continued)
Automatic Connection Break
The TCP connection is automatically disconnected after there is no communication
Authentication
The projector does not accept commands without authentication success
authentication with an MD5 (Message Digest 5) algorithm.
this data using the MD5 algorithm and add this in front of the commands to send.
Following is a sample if the Authentication Password is set to password and the
1) Connect the projector.
send the data.
6) When the sending data is correct, the command is performed and the reply
data is returned. Otherwise, an authentication error is returned.
NOTE
LWU701i/LW751i/LX801i/LWU601i/LW651i
Network Guide
101
8. Other Functions
020-000787-03
LIT MAN USR D2 Network