Transmission Method; Half-Duplex - Christie LWU701i User Manual-Network Manual

7.4 Transmission method

( OPTION menu > SERVICE > COMMUNICATION in the
HALF-DUPLEX  FULL-DUPLEX

7.4.1 HALF-DUPLEX

direction, either transmitting or receiving data, is allowed at a time.
The method does not allow the projector to receive the data from the computer
while waiting for response data from an external device. After the projector
receives the response data from an external device or the response limit time is
past, the projector can receive the data from the computer.
That means that the projector controls transmitting and receiving the data to
To use the HALF-DUPLEX method, set up the RESPONSE LIMIT TIME following
Computer
Transmitting data
Discarding data
Using the RESPONSE LIMIT TIME menu, set the waiting time for response data
from an external device. (
the
OFF  1s  2s  3s ( OFF)
LWU701i/LW751i/LX801i/LWU601i/LW651i
Network Guide
TCP/IP data Protocol change
Wired LAN
Wireless LAN
Response data
OPTION menu > SERVICE > COMMUNICATION in
)
7. Network Bridge Function
Serial data
RS-232C
Transmitting data
Response limit
time
Response data
Discarding data
87
)
External device
020-000787-03
LIT MAN USR D2 Network