SOMFY Power 1 X 2,5 DC RTS Receiver Operating And Installation Manual page 13

D.4) Disappearing sun position :
This feature requires the use of a sun sensor.
This function is used only for Venetian blinds.
In order to have a Disappearing sun position,
an up and down duration as well as a My
position must be saved.
Press the Down and My buttons for
approximately 2 seconds.
The blind goes to My position.
Using the Up and Down buttons to adjust the
Disappearing sun position (slat in horizontal
position).
Press the My button for approximately
5 seconds until the blind moves up and
down. The Disappearing sun position has
been saved.
Readjusting the position: :
To readjust the No sun position, repeat pre-
vious procedure (1st time setting).
Deleting the position:
Press the Down and My buttons for
approximately 2 seconds.
The blind goes to My position.
Press the Down and My buttons for
approximately 5 seconds until the blind
moves up and down.
The No sun position has been deleted.
Note: If the My position is deleted, the No sun
position is automatically deleted also.
Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009 11