NAiS GT Series Technical Manual page 65

4.1.4 Connecting to the TOOL port of FP2 / FP2SH (2)
Connecting to the TOOL port
FPΣ Σ Σ Σ communication format settings
System register No.
410
412
413
415
Reference: <4.1.15 How to Make Communication Settings Using the FPWIN GR>
PLC communication cable: Mini-DIN 5-pin loose-wire cable (AIGT8162, AIGT8165, AIGT8160)
Connecting to the FP2/FP2SH TOOL port
Item
TOOL port unit number
Modem connection
Data length
Parity check
Stop bits
End code
Start code
COM. port 1 Baud rate setting
Value set
1
No modem connection
8 bits
Yes, Odd
1 bit
CR (Fixed)
No STX (Fixed)
9600 bps
4-5