NAiS GT Series Technical Manual page 135

Backlight control
Auto-Off
This is used to specify the Auto-Off backlight feature.
• Off:
The Auto-Off backlight feature is not used.
• On:
Auto-Off backlight feature is used. This parameter specifies the period of time that the GT01
is inactive before the backlight goes off automatically.
If "On" is set for the above Auto-Off backlight feature, clicking on the
the time until the backlight goes off can be specified. Any time from one minute to 30 minutes can be
specified.
Key Point:
• If the backlight is turned off automatically using the backlight control function, touching the screen
turns it on again. If a touch switch happens to be located at that point on the screen, it will be invalid
until the backlight has gone on again.
Touch Sounds
This sets the touch sounds corresponding to GT01 screens as either invalid or valid. Select one of the
radio buttons.
• Disable:
Touch sounds are disabled.
• Enable:
Touch sounds are enabled.
Setup of Multi language exchange
This is used if you want to change the language to be displayed from the PLC side.
• Off:
PLC is not referred.
• On:
The specified PLC is referred.
Reference:
For details on Multi language exchange function, <Terminal GTWIN Operational Guide Book
ARCT1F357>, <GTWIN HELP>
button displays a screen where
5-11