Table of Contents
Advertisement
Using the auto-paging function
The GT man unit has an "Auto-paging" function that automatically switches the screen to a specified
screen number when a certain period of time has elapsed. This function can be used to switch screens
automatically.
Reference: <5.2.3 GT Configuration Settings: "Auto-Paging">
Note:
If using this function, please be aware that the value of the third word in the basic communication
area/word device (the number of the currently displayed screen) changes to that of the new screen
number, but the contents of the first word (the screen number specified by the PLC) do not change.
Clicking on the
button displays the value setting dialog box shown below. Specify the number of the
screen to which the display is to be changed.
Value Set dialog box
6-4
If the value is entered with the
the left, a hexadecimal screen number is specified, and if the
value is entered with the
is entered.
The
button acts as a backspace key when entering an
address, and the
button pressed as shown at
button pressed, a decimal value
button functions as a Clear key.
Advertisement
Table of Contents
