Using The Multi-Use Detachable Ring; To Use The Multi-Use Detachable Ring As A Finger Carrying; Strap; Using The Sd Card - FujiFilm instax Pal User Manual

Hide thumbs Also See for instax Pal:
Table of Contents

Advertisement

Preparation for the camera

Using the multi-use detachable ring

The multi-use detachable ring can be used not only as a strap, but
also as a simple viewfinder or base for the camera� (page 20)
To use the multi-use detachable ring as a finger
carrying strap:
1
Pass the provided strap through the strap holes on
the camera.
2
Pass the other end of the strap through the strap
holes on the multi-use detachable ring. Insert your
desired finger through the multi-use detachable
ring.
5

Using the SD card

The camera's internal memory can store about 50 still images, but
you can store more images by using an SD card� You will also need
an SD card to upgrade the firmware� Please prepare an SD card in
advance�
* The latest firmware will be published on the product website�
* SD card is sold separately�

Inserting a microSD card (sold separately)

Open the cover on the side of the camera, and insert a microSD
card into the microSD card slot� Once a microSD card is inserted,
all further photos will be stored on the microSD card rather than
to the internal camera memory�
When removing the microSD card, gently push the card in until it
"clicks" and then release it to allow ejection� Gently remove the
microSD card from the slot�
• microSD card is sold separately�
Precautions regarding SD cards
• This camera is compatible with microSD cards and microSDHC
cards� Using other types of SD cards may cause damage to the
camera�
• SD cards are small and may be accidentally swallowed by infants�
Keep them out of the reach of infants� In the unlikely event that
an infant swallows an SD card, consult a physician immediately�
• Do not turn off the camera or remove the SD card during
formatting or while recording/deleting data� The SD card may be
damaged�
• Do not use or store SD cards in an environment that is prone to
strong static electricity or electrical noise�
• Inserting an SD card charged with static electricity into the
camera may cause the camera to malfunction� If this happens,
turn the camera off and then on again�
• Do not carry an SD card in the pocket of your pants� A strong
force may be applied when you sit down, which may cause the
SD card to break�
• The SD card may become hot to the touch after prolonged use,
but this is not a fault�
• Do not put any labels on SD cards� If the label comes off, it may
cause the camera to malfunction�

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fi026

Table of Contents