Attach transmitter to bracket
Align appropriate mounting holes in transmitter with holes in bracket and secure the transmitter to the
bracket with bolts and washers provided.
If the meter body is hexagonal, you must use the additional bracket supplied. If meter body is round,
discard the bracket.
Transmitter type
DP type with double-ended
process heads and/or remote
seals
Dual head GP
In-line GP and AP (LGP
model)
Temperature/DI
Multiple DI
High Level Analog Input
Corrosion
Universal I/O
In flush flange, extended flange and pseudo flange pressure transmitter applications, the transmitter bolts
directly to the process connection (tank spud) and no bracket is required.
Revision 12
February 2013
Table 2-7 Bracket Attacment
Attachment to bracket
Alternate mounting holes
in end of heads.
Mounting holes in end of
process head
Smaller "U" bolt.
Smaller "U" bolt.
Smaller "U" bolt.
Smaller "U" bolt.
Smaller "U" bolt.
Smaller "U" bolt.
OneWireless XYR 6000 Transmitters Quick Start Guide
Transmitter Mounting
Bracket mounting
Example
A
B
C
C
B
D
A
19