Attach The Pyrolyzer Or Ndir - Honeywell Midas S2 User Manual

Fixed single-point extractive gas transmitter

Hide thumbs Also See for Midas S2:

Table of Contents

2.7 Attach the pyrolyzer or NDIR

1. Turn the power off.

2. Remove the main module as described in the Mount the Device process.

3. Plug the connector into the socket (as indicated in the image) at the bottom right of the

terminal module through the rectangular access of the mounting bracket. Align the fitting

at the top rear of the pyrolyzer or NDIR with the gas inlet port at the bottom of the

mounting bracket.

NOTE: Please secure no tubing leakage between the base module and NDIR through the

blocking test after NDIR installation.

4. Connect the pyrolyzer or NDIR to the detector with the three provided mounting screws

5. Place the main module and screw the two screws referring to steps 11 and 12 of 'Mounting

the device.'

Midas S2

FIGURE 2 -8: Pyrolyzer socket

User Manual

Table of Contents