Transmitter Location; Pressure Models; Conduit / Cable Entries; Table 2-5 Pressure Models - Honeywell OneWireless XYR 6000 Quick Start Manual

2.4

Transmitter location

Pressure models

Process
Gases
Liquids
2.5

Conduit / Cable Entries

NOTICE
Summary

Table 2-6 Conduit entry plugs and cable glands for your XYR 6000 transmitter.

Factory Part
Description
No.
50000547-001 M20 Conduit Plug
50021832-002 ½ NPT Conduit Plug
50023232-001 M20 Cable Gland
50023212-001 ½ NPT Cable Gland
Revision 12
February 2013

Table 2-5 Pressure models

Suggested location
Above the gas line
•
Below but close to the
elevation of the process
connection.
•
Level with or above the
process connection.
THIS PRODUCT IS SUPPLIED WITH PLASTIC DUST PLUGS IN THE
CONDUIT/CABLE GLAND ENTRIES. IT IS THE USERS RESPONSIBILITY TO
PROVIDE CABLE GLANDS, ADAPTORS AND/OR BLANKING PLUGS SUITABLE
FOR THE ENVIRONMENT IN WHICH THIS PRODUCT IS INSTALLED. WHEN
INSTALLED IN A HAZARDOUS LOCATION THE CABLE GLANDS, ADAPTORS
AND/OR BLANKING PLUGS SHALL ADDITIONALLY BE SUITABLE FOR THE
HAZARDOUS LOCATION, THE PRODUCT CERTIFICATION AND ACCEPTABLE TO
THE AUTHORITY HAVING JURISDICTION FOR THE INSTALLATION
Environmental
rating
IP66-68, 4X, 6P
IP66-68, 4/4X,
6/6P
IP68
IP68
OneWireless XYR 6000 Transmitters Quick Start Guide
The condensate drains away from the
transmitter.
•
This minimizes the static head
effect of the condensate.
•
This requires a siphon to protect
the transmitter from process
steam. The siphon retains water as
a "fill fluid."
Ambient Hazardous Location Certification
–40 – 85ºC
ATEX
–40 – 185ºF
ATEX
–40 – 85ºC
CSAcus CL I, Zone 1, Ex/AEx d IIC;
–40 – 185ºF
CL I, Div 1 & 2, GP ABCD; CL II, Div
1 & 2, GP EFG; CL III, Div 1 & 2
–40 – 100ºC
-----------------------------------
–40 – 212ºF
–40 – 100ºC
-----------------------------------
–40 – 212ºF
Transmitter Mounting
Transmitter location
Explanation
EEx de IIC
EEx d IIC;
17